.png)
.png)
.png)
No.163, Jalan S2 C6,
Green Technology Park,
70300 Seremban,
Negeri Sembilan, Malaysia.
+606-6036161
+606-6030909
- Universal Testing Machine
- Rubber Testing
- Plastic Testing
- Metal Testing
- Paper Testing
- Environmental Test Machine
- Hardness Tester
- Metallographic Equipments
- Metrology Equipments
- Accessories
- Analytical Instruments
- Bending Testing Machine
- Elastomeric Bearing Testing Machine
- NDT Equipment
- Preowned Equipment
- Spring Testing Machine
JNG Industry Sdn Bhd
No.163, Jalan S2 C6,
Green Technology Park,
70300 Seremban,
Negeri Sembilan, Malaysia.
No.163, Jalan S2 C6,
Green Technology Park,
70300 Seremban,
Negeri Sembilan, Malaysia.
JG-500 Electronic Tensile Testing Machine 50N 每 5kN (5Kgf-500Kgf)
| Previous | 1 / 7 | Next |
INTRODUCTION
Conform To The Standards:
I)Metal:
ASTM E8, ISO 6892, BS EN 10002-1, ASTM E21, IS0 783, EN ISO 7438, ISO
14589, ASTM F606
II)Plastics/ Composites:
ASTM D638, EN ISO 6259, EN ISO 527-1, ISO 604, ASTM D695, ASTM D3846, EN
ISO 844, EN ISO 13968, EN ISO 9969, etc.
III)Geo-textiles:
ASTM D3950, ASTM D 6775-02, BS EN ISO 10319, JBT 8521(EN 1492-2).Rubber:
ISO 37, ASTM D41
Technical Specifications:
- It is applicable for wide range of material for tension, compression, bending,shearing and low cycle test. Suitable for metal, rubber, plastic, spring, textile,and components testing. It is widely used in the corresponding industries,research and development, test institutes and training centers etc.
- It adopts rigid load frames, high accurate load weighting system, advancedmeasuring & control system and intuitive modular application software.Configured with extensive range of accessories for various applications, it can provide the optimal testing solutions for your individual application needs.
Conform To The Standards:
I)Metal:
ASTM E8, ISO 6892, BS EN 10002-1, ASTM E21, IS0 783, EN ISO 7438, ISO
14589, ASTM F606
II)Plastics/ Composites:
ASTM D638, EN ISO 6259, EN ISO 527-1, ISO 604, ASTM D695, ASTM D3846, EN
ISO 844, EN ISO 13968, EN ISO 9969, etc.
III)Geo-textiles:
ASTM D3950, ASTM D 6775-02, BS EN ISO 10319, JBT 8521(EN 1492-2).Rubber:
ISO 37, ASTM D41
Technical Specifications:
| Model | JG-500 |
|---|---|
| Capacity | 50N-5kN (5-500Kgf) |
| Load accuracy | Class 0.5 |
| Testing load accuracy | ±0.5% |
| Testing load range (FS) | 0.4% ~ 100% |
| Load resolution | 1/500,000FS |
| Deformation accuracy | ≤±0.5% of 0.4% ~ 100% of rated capacity |
| Position resolution (µm) | 0.025 |
| Position accuracy | ±0.02mm or 0.5% of displacement (whichever is greater) |
| Crosshead speed range | 0.001 ~ 500 |
| Crosshead speed accuracy | ±0.5% of set speed (zero or constant load) |
| Stroke (exclude the grips) (mm) | 972 |
| Max. tensile testing space (mm) | 800 |
| Max. compression platen (mm) | 800 |
| Compression platen (mm) | Ø98 |
| Power supply | AC220V ±10%, 50Hz/60Hz |
| Dimension (L x W x H : mm) | 850 x 590 x 1540 |
| Net weight (kg) | 180 |
|
Note:
|
|