No.163, Jalan S2 C6,
Green Technology Park,
70300 Seremban,
Negeri Sembilan, Malaysia.
+606-6036161
+606-6030909
+606-603 6161 +6012-683 8063 enquiry@jng-industry.com |
Previous | 1 / 4 | Next |
Operating voltage | 220V |
Spindle power | 800W |
Spindle speed | 24000rpm |
Chuck size | 1 ~ 6mm |
Cooling system | Water-cooled |
Table size | 440 x 240 |
Dimensions | 550 x 450 x 520 |
Motor type (X axle) | 57 type 3A |
Motor type (Y axle) | 57 type 3A |
Motor type (Z axle) | 57 type 3A |
Precision | 0.02 ~0.05mm |
Repeatability | 0.01 ~c0.02mm |
Slide unit (X axle) | 20 hard chrome optical axis |
Slide unit (Y axle) | 20 hard chrome optical axis |
Slide unit (Z axle) | 12 hard chrome optical axis |
Drive unit | Ball screw |
Limit switches | 6 limit switches |
The fastest | 3500mm/min |
Weight | 43kg |
Package size | 68 x 58 x 62cm |
Working area | 300 x 200x 100mm |
Volume | 550 x 450 x 520mm |
Main axle power rate | 800w |
Main axle rotating speed | 24000rpm |
Max. working speed | 3500mm/min |
Feeding height | 100mm |
Engraving tools | 1 ~ 6mm |
System | mach3 |
Working drive | 0.02 ~ 0.05mm |
Repositioning accuracy | 0.01 ~ 0.02mm |
Supported file format | DXF EPS PLT STL G code NC etc. |
Power | AC220V |
Weight | 43kg |
Mainframe | x1 |
Control box | x1 |
Hand wheel | x1 |
Power cable | x1 |
Parallel card | x1 |
Parallel lines | x1 |
USB Cable | x1 |
Platen | x4 |
Wrench | x2 |
Chuck (6mm) | x2 (6mm˴ 3.175mm) |
Tool | 3 blade Tungsten steel milling cutter for aluminum x5 |