.png)
.png)
.png)
No.163, Jalan S2 C6,
Green Technology Park,
70300 Seremban,
Negeri Sembilan, Malaysia.
+606-6036161
+606-6030909
- Universal Testing Machine
- Rubber Testing
- Plastic Testing
- Metal Testing
- Paper Testing
- Environmental Test Machine
- Hardness Tester
- Metallographic Equipments
- Metrology Equipments
- Accessories
- Analytical Instruments
- Bending Testing Machine
- Elastomeric Bearing Testing Machine
- NDT Equipment
- Preowned Equipment
- Spring Testing Machine
JNG Industry Sdn Bhd
No.163, Jalan S2 C6,
Green Technology Park,
70300 Seremban,
Negeri Sembilan, Malaysia.
No.163, Jalan S2 C6,
Green Technology Park,
70300 Seremban,
Negeri Sembilan, Malaysia.
JG-1000TS Electromechanical Universal Testing Machine 10kN (1Ton)
| Previous | 1 / 6 | Next |
INTRODUCTION:
Conform To The Standards:
I)Rigid and Reinforced Plastics/Composite:
Technical Specifications:
- JG-1000TS (Touch Screen) electromechanical testing machines offer force, displacement or deformation closed loop testing in tension, compression, flexure, shear, tear and peel etc. The machine can be equipped with a variety of accessories including: grips, fixtures, compression frames, thermal cabinets and extensometers covering all relevant applications as testing of rubber, plastics, foils, films, textiles, adhesives, paper, foods, foams, timber, wires or other metallic or non-metallic specimens and medical, electronic and other components.
Conform To The Standards:
I)Rigid and Reinforced Plastics/Composite:
- EN ISO 6259 - parts 1/2/3 Determination of tensile properties of thermoplastic pipes;
- EN ISO 527-1 - parts 1/2/3 Determination of tensile properties on plastics;
- ASTM D638 Standard Test Method for Tensile Properties of Plastics
- ISO 604 Plastics - determination of compressive properties
- ASTM D695- Plastics -- Standard Test Method for Compressive Properties of Rigid Plastics
- EN ISO 9969 Determination of ring stiffness on thermoplastic pipes;
- ISO 14125 Flexural Properties of Fiber-Reinforced Plastic Composites
- ASTM D3846 Standard Test Method for In-Plane Shear Strength of ReinforcedPlastics;
- EN ISO 13968 Plastics piping and ducting systems -Thermoplastics pipes-Determination of ring flexibility;
- EN ISO 844 Determination of compression properties;
- BS EN ISO 10319 Geotextiles —Wide-width tensile test;
- ASTM D3950 Standard Specification for Strapping, Nonmetallic (and JoiningMethods);
- JBT 8521(EN 1492-2): Textile slings. Safety. Round slings, made of man-made fibers, for general purpose use;
- ASTM D 6775-02 Standard Test Method for Breaking Strength and Elongation of Textile Webbing, Tape and Braided Material;
- ASTM E8 Standard Test Methods for Tension Testing of Metallic Materials;
- ISO 6892 Metallic materials — Tensile testing — Method of test at ambient temperature;
- BS EN 10002-1Determination of tensile properties on metals;
- BS EN 10002-5: Metallic materials —Part 5: Method of test at elevated temperatures;
- ASTM E21: Standard Test Methods for Elevated Temperature Tension Tests of Metallic Materials;
- IS0 783: Metallic materials -Tensile testing at elevated temperature;
- EN ISO 7438 Determination of flexure tests on metals;
- ASTM F606: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets;
- ISO 14589: Blind rivets - Mechanical testing;
- SAE J429: Mechanical and Material Requirements for Externally Threaded Fastener;
Technical Specifications:
| MODEL | JG-1000TS |
| Load Capacity | 10KN (1000Kgf) |
| Calibration Standard | Class 0.5 according to ISO 7500-1 – Meets ASTM E-4 |
| Testing Load Accuracy | ±0.5% |
| Testing Load Range | 0.4%-100%FS |
| Load Resolution | 1/500,000FS |
| Deformation Measuring Range | 0.2%-100%FS |
| Deformation Accuracy | £±0.5% |
| Deformation Resolution | 1/±500000FS of the max deformation |
| Position Accuracy | Within ±0.5% of the value |
| Displacement Resolution | 0.04mm |
| Crosshead Speed Range | 0.00-1000mm/min |
| Crosshead Speed Accuracy | ±0.5% of the set speed |
| Crosshead Travel | 1100mm |
| Max. Tensile Testing Space | 770mm |
| Max. Compression Testing Space | 770mm |
| Test Width | 450mm |
| Compression Platen | Æ100mm |
| Position Limit Switch | Upper and lower lights |
| Power Supply | 0.75KW, AC220V±10%, 50Hz/60Hz |
| Overall Dimensions (L*W*H) | 850x585x1824mm |
| Weight | 420kg |