.png)
.png)
.png)
No.163, Jalan S2 C6,
Green Technology Park,
70300 Seremban,
Negeri Sembilan, Malaysia.
+606-6036161
+606-6030909
- Universal Testing Machine
- Rubber Testing
- Plastic Testing
- Metal Testing
- Paper Testing
- Environmental Test Machine
- Hardness Tester
- Metallographic Equipments
- Metrology Equipments
- Accessories
- Analytical Instruments
- Bending Testing Machine
- Elastomeric Bearing Testing Machine
- NDT Equipment
- Preowned Equipment
- Spring Testing Machine
JNG Industry Sdn Bhd
No.163, Jalan S2 C6,
Green Technology Park,
70300 Seremban,
Negeri Sembilan, Malaysia.
No.163, Jalan S2 C6,
Green Technology Park,
70300 Seremban,
Negeri Sembilan, Malaysia.
JG-400DT Melt Flow Indexer (Touch Screen)
| Previous | 2 / 5 | Next |
Introduction:
Features:
Technical Specifications:
- The melt index meter meets the standard requirements of GB/T3682-2000. The main parameters of the melt index meter also meet the requirements of ISO1133-97, ASTM1238, JIS and other standards. It can be used for polyethylene, polypropylene, polystyrene, ABS, poly Measure the melt mass flow rate (MFR) or melt volume flow rate (MVR) of various plastic materials such as amide, fiber resin, acrylic ester, polyoxymethylene, fluoroplastics, polycarbonate, etc., widely used in plastic production , Plastic products, petrochemical industries and related colleges, research institutes and commodity inspection departments.
Features:
- High-precision Chinese and English color controllers, specially customized membrane buttons, have unparalleled advantages in control accuracy and service life
- The manual and automatic cutting are integrated control, accurate to 0.1s, and the cutting time and cutting times can be set arbitrarily.
- Built-in micro printer, which can print test data
- Dual temperature control system, using double imported heating coils and double imported PT100 platinum resistance sensors to improve test accuracy and temperature stability.
- Increase the displacement sensor, can test MVR (volume method), the accuracy is 0.01mm.
- The volume method test does not need to be cut, and the test result can be directly output
- The density value of the material at a specific temperature can be calculated by the ratio of the volume method and mass method 2.8 It can be connected to the computer via USB, and the test conditions can be set on the computer through the software, and the data can be printed and stored (optional)
Technical Specifications:
| Parameters | JG-400DT |
| Temperature Range | 0°C-450°C |
| Temperature Fluctuation | ±0.2°C |
| Temperature Uniformity | ±1°C |
| Temperature Display Resolution | 0.1°C |
| Time Display Resolution | 0.1s |
| Die Diameter | Æ2.095±0.005mm |
| The Length of the Discharge Port | 8.000±0.025mm |
| The Diameter of the Charging Cylinder | Æ9.550±0.025mm |
| Weight Accuracy | ±0.5% |
| Displacement Measurement Accuracy | 0.01mm |
| Volume Method Timing Accuracy | 0.001S |
| Displacement Measurement Encoder | Omron Photoelectric Rotary Encoder |
| Quality Method Test Range | 0.1 – 150g / 10min |
| Volume Method Test Range | 50 – 5000cm3 / 10min |
| Output Mode | Micro Automatic Printout |
| Cutting Method | Manual and Automatic Cutting in one |
| Test Load | A full set of eight-level weights |
| Power Supply Voltage | AC220V±10% 50HZ |