.png)
.png)
.png)
No.163, Jalan S2 C6,
Green Technology Park,
70300 Seremban,
Negeri Sembilan, Malaysia.
+606-6036161
+606-6030909
- Universal Testing Machine
- Rubber Testing
- Plastic Testing
- Metal Testing
- Paper Testing
- Environmental Test Machine
- Hardness Tester
- Metallographic Equipments
- Metrology Equipments
- Accessories
- Analytical Instruments
- Bending Testing Machine
- Elastomeric Bearing Testing Machine
- NDT Equipment
- Preowned Equipment
- Spring Testing Machine
JNG Industry Sdn Bhd
No.163, Jalan S2 C6,
Green Technology Park,
70300 Seremban,
Negeri Sembilan, Malaysia.
No.163, Jalan S2 C6,
Green Technology Park,
70300 Seremban,
Negeri Sembilan, Malaysia.
JG-138C100 Manual Metallographic Sample Cutting Machine
| Previous | 2 / 10 | Next |
Introduction:
- The JG-138C100 metallographic cutting machine is suitable for cutting samples of various metal and non-metal materials in order to observe the metallographic and lithofacies structure of the material. With high performance, low noise, large cutting chamber, fully enclosed and waterproof motor, this machine is vertical, and has the characteristics of novel design, convenient operation, safety and reliability. In addition, the machine is equipped with a cooling device, which uses the configured cooling liquid to take away the heat generated by the cutting process to prevent the sample from overheating and burn the sample structure. The machine is suitable for metallographic lab in factories and mines, universities and research institutes.
| Model | JG-138C100 |
| Max. cutting dia. | 100mm |
| Effective workpiece length | 200mm |
| Dimension of working table | 230 x 245mm |
| Cutting wheel specification | 350 x 2.5 x 32mm |
| Claiming Jig Specification | Jig at left and right side, cutter at center |
| Feed depth tracking | Manually |
| Cutting mode | Manual |
| Material feed mode | Manual adjustable |
| Cutter in feed distance | Arbitrary set, by adjust the clamping position |
| Reset mode | Manual |
| Rotating speed | 2800r/min |
| Input voltage | Three phase 380V, 50Hz |
| Cooling system | Water cooling 2 channels |
| Power | 3.0KW |
| Weight | About 200kg |
| Tank capacity | 50L |
| Dimension | 680 x 800 x 1450mm |
| Special artifacts can be customized | |
| Disc jig, Rack jig, Universal jig | |