+606-603 6161     +6012-683 8063
enquiry@jng-industry.com

JNG Industry Sdn Bhd
No.163, Jalan S2 C6,
Green Technology Park,
70300 Seremban,
Negeri Sembilan, Malaysia.
+606-6036161
+606-6030909

Recent Updates

JG-124B Fully Automatic Micro Vickers Hardness Tester

JG-124B Fully Automatic Micro Vickers Hardness Tester

INTRODUCTION: Applicable scope of hardness tester: It is mainly used to measure small, thin specimens and brittle hardware. It can be used for various metals (ferrous metals, non-ferrous metals, castings, alloy materials, etc.), metal structures, metal surface processing layers, carburized layer, hardened layer (oxidized, various infiltrated layers, coated layers), heat-treated specimens, carbonized specimens, quenched specimens, tiny parts of phase inclusions, glass, agate, artificial gems, ceramics and other brittle and hard non-metals, material testing, precise positioning of multi-point measurement in the fine part, deep test and analysis of indentation, test and analysis of infiltration coating, test of hardness gradient, etc., observation and study of metallographic structure, measurement and measurement of coating thickness Analysis etc.​ The host uses optical-mechanical-electrical integration technology, one-key operation, efficient and fast; adopts C language programming, dual-core dual-channel control system, and LCD computer operation panel. Automatic turret structure, vertical loading mechanism, high-precision lifting mechanism, and encoder directly collect data, which can realize dual display of any hardness unit. Realize the connection of computer image processing system, eyepiece and CCD photography to watch and test at the same time, equipped with large-capacity storage system, micro-printer, more suitable for batch sample detection. The image processing system adopts a high-precision CCD image imaging system and a computer image acquisition processor to convert the indentation images collected in the instrument into the hardness measurement software processing center, and is equipped with a hardness measurement analysis system. Accuracy conforms to GB/T4340.2 ISO6507-2 and American ASTME384. Technical Specifications: Model JG-124B Test Force 10gf (0.098N), 25gf (0.245N), 50gf (0.49N), 100gf (0.98N), 200gf (1.96N), 300gf (2.94N), 500gf(4.9N), 1kgf (9.8N) Scale HV0.01, HV0.025, HV0.05, HV0.1, HV0.2, HV0.3, HV0.5, HV1 Data Input Mode Automatically Measurement HV (HK optical) Turret Method Automatic Turret Measurement Mode Fully automatic and manual, automatic focus Display Mode 7 inch LCD touch screen digital display, computer display Focus Objective 10X/40X Total Magnification 100X    400X Electric X-Y-Z Automatic Platform One set is convenient for single-point and multi-point automatic testing. Manual, automatic focus, measurement Dwell time 1~60S Loading Method Automatic completion of adding, protecting and unloading test Test Storage Times 10 pcs per group, 500 groups Smallest Moving Unit 0.015625mm Max. Size of Test Piece Max, Height 90mm, throat depth 110mm Main Functions of the Software System linkage, pressure linkage, loading linkage, image acquisition, automatic measurement, automatic point-finding, diagonal measurement, four-point measurement, hardness conversion, graphic report, result statistics Dimensions 320*500*570mm Weight 60KG Executive Standard GB/T4340.2 National Standard (GB/T4340.2 Chinese Standard), JJG151 Inspection Rule (JJG151 Inspection Rule) read more
JNG Industry Sdn Bhd updated About Us page content
1 hour ago —

About Us

We are pleased to introduce to you our company, JNG Industry Sdn Bhd established in June 2017, Corporation in Malaysia and to highlight our commitment in the Materials Testing and Environmental Testing Equipment business in Malaysia. We started provide more comprehensive services to our existing and new customer since August 2004. To date we have grown steadily and we would like to assure you that JNG Industry Sdn Bhd is aiming to provide not only our reliable products but also our best service in this region. JNG Industry Sdn Bhd is a leading professional services that providing solution plan for material testing. The company specialized in selling, servicing, upgrading & modification testing instruments and provides resolutions on material testing, structure testing and finished products testing. JNG Industry Sdn Bhd is specialist for destructive & non destructive tests for the auto parts industries, metal & iron, paper & corrugated box, rubber & plastic and wire & cable. JNG Industry Sdn Bhd provide full series of middle & high end testing machines, such as universal electronic testing machine, impact testing machine, electro-hydraulic and hydraulic universal testing machine and so on. We also provide variety of analytical testing and solutions, such as vibration simulation analysis, earthquake simulation, hardness analysis fluorescence analysis, It can meet varies requirements from the national defense industry, commodity inspection, quality control, scientific research institutions, universities, enterprises, undertakings and other units in the material testing, structural testing and finished product testing machine needs. Our clients throughout Malaysia, including Singapore and Indonesia, we now more than thousand customer. Quality Control JNG Industry Sdn Bhd not only providing first-class products, but also provide the quality service; we can provide profession help on your product quality and material developing¡­.. JNG Industry Sdn Bhd look forward to working with you to create a better future¡­. JNG Industry Sdn Bhd  will go farther¡­   Expectation To be an enterprise with respective, reliable and employee can be proud of. Business Aim We mostly focus on the feeling of our customers; make our customers enjoy every test. Objective Be a main force in the national testing machine industry, and target on international standards Management Ideas Fully meet customers¡¯ requirements, beyond technology, quality oriented. Promote the life quality of employees; build the national brands with great efforts   read more
JNG Industry Sdn Bhd added new photo in Rubber Testing
Mar 21, 2024 at 09:00 am —
JG-300ARDM Rubber Density Meter

JG-300ARDM Rubber Density Meter

Introduction: Rubber, wire and cable, aluminum products, PVC plastic particles, powder metallurgy, minerals and rocks, EVA foaming materials, glass industry, metal products, precision ceramics, refractory material, magnetic material, alloy materials, machinery parts, recovery of metals, minerals and rocks, cement manufacturing, jewelry industry new materials research laboratory.   Standard: D792 ASTM, D297 GB/T1033, GB/T2951, GB/T3850, GB/T533, HG4-1468, ASTM, K6268 JIS, ISO 2781, ISO 1183.    Specifications:   Model JG-300ARDM Weight range 300g- 0.005g~ Specific gravity 0.001 g/cm3   Measurement time about 10 seconds Weight density volume   Setting: temperature compensation setting, solution compensation setting   read more
JNG Industry Sdn Bhd added new photo in Environmental Test Machine
Mar 19, 2024 at 02:49 pm —
JG-E7058 Walk-in Temperature Test Chamber

JG-E7058 Walk-in Temperature Test Chamber

Introduction: The walk-in constant temperature test room is widely used in aerospace, aviation, electronics, automobiles, batteries and other industries for accelerated thermal cycle test, alternating temperature test and constant temperature test of electronic and electrical products, materials, parts, equipment, etc.   Feature: For aerospace, aviation, electronics, automobiles, batteries and other products and quality inspection institutes, research institutes, colleges and universities and other testing units, provide virtual space to simulate the real environment, and verify product inspection and research and development results. The test box is to shorten the development cycle. An indispensable right-hand man to improve product quality and reliability.   Technical Specifications: MODEL JG-E7058 Internal Dimensions W2000mm * D2000mm * H2100mm External Dimensions About W2400mm * 2400mm * 3000mm Temperature Range 5¡ãC ~ 40¡ãC Temperature Fluctuation £ ¡À0.5¡ãC Temperature Uniformity £ ¡À2¡ãC Cooling Rate +30¡ãC ~ 5¡ãC ³25 min (average 1¡ãC/min) Heating Rate 5¡ãC ~ +35¡ãC ³10min (average 3¡ãC/min) Door Opening Method Single Door or Double Door Meet the Standard GB/T5170.2-2008 Temperature Testing Equipment GB/T5170.5-2008 Damp Heat Testing Equipment Test Method GB/T 2423.2/IEC 60068-2-2-2008 Basic environmental test procedures for electrical and electronic products Test B: High temperature test   GB10592-2008/IEC 60068-3-5 high and low temperature test chamber technical conditions   GB/T 5170.1-2008/IEC 60068-1 Basic parameter verification method general rules   GB/T5170.2-2008/ IEC 60068-2 Inspection method of environmental testing equipment for electrical and electronic products Temperature testing equipment Power Three phase, AC 380V Noise Sound level £ 75dB(A) (1m in front of the gate, 1.2m from the ground, measured in free space) Machine Shock Absorption The main parts of the machine have shock absorption function Cooling method Air cooling read more
JNG Industry Sdn Bhd added new photo in Plastic Testing - Plastic Testing Machine
Mar 19, 2024 at 12:56 pm —
JG-400DT Melt Flow Indexer (Touch Screen)

JG-400DT Melt Flow Indexer (Touch Screen)

Introduction: The melt index meter meets the standard requirements of GB/T3682-2000. The main parameters of the melt index meter also meet the requirements of ISO1133-97, ASTM1238, JIS and other standards. It can be used for polyethylene, polypropylene, polystyrene, ABS, poly Measure the melt mass flow rate (MFR) or melt volume flow rate (MVR) of various plastic materials such as amide, fiber resin, acrylic ester, polyoxymethylene, fluoroplastics, polycarbonate, etc., widely used in plastic production , Plastic products, petrochemical industries and related colleges, research institutes and commodity inspection departments.   Features: High-precision Chinese and English color controllers, specially customized membrane buttons, have unparalleled advantages in control accuracy and service life The manual and automatic cutting are integrated control, accurate to 0.1s, and the cutting time and cutting times can be set arbitrarily. Built-in micro printer, which can print test data Dual temperature control system, using double imported heating coils and double imported PT100 platinum resistance sensors to improve test accuracy and temperature stability. Increase the displacement sensor, can test MVR (volume method), the accuracy is 0.01mm. The volume method test does not need to be cut, and the test result can be directly output The density value of the material at a specific temperature can be calculated by the ratio of the volume method and mass method 2.8 It can be connected to the computer via USB, and the test conditions can be set on the computer through the software, and the data can be printed and stored (optional)    Technical Specifications: Parameters JG-400DT Temperature Range 0¡ãC-450¡ãC Temperature Fluctuation ¡À0.2¡ãC Temperature Uniformity ¡À1¡ãC Temperature Display Resolution 0.1¡ãC Time Display Resolution 0.1s Die Diameter Æ2.095¡À0.005mm The Length of the Discharge Port 8.000¡À0.025mm The Diameter of the Charging Cylinder Æ9.550¡À0.025mm Weight Accuracy ¡À0.5% Displacement Measurement Accuracy 0.01mm Volume Method Timing Accuracy 0.001S Displacement Measurement Encoder Omron Photoelectric Rotary Encoder Quality Method Test Range 0.1 – 150g / 10min Volume Method Test Range 50 – 5000cm3 / 10min Output Mode Micro Automatic Printout Cutting Method Manual and Automatic Cutting in one Test Load A full set of eight-level weights Power Supply Voltage AC220V¡À10% 50HZ   read more
JNG Industry Sdn Bhd added new photo in Paper Testing - Bursting Tester
Mar 19, 2024 at 12:17 pm —
JG-322B Bursting Strength Tester

JG-322B Bursting Strength Tester

Introduction: JG-322B Bursting Strength Tester is an instrument for testing the strength properties of paper and cardboard. It is mainly suitable for testing various cardboards and single-layer and multi-layer corrugated cardboard, and can also be used for non-paper such as silk and cotton. Bursting strength test of material.   Standard: JIS-L1004, JIS-L1018, JIS-L1031, JIS-K6328, JIS-P8131, JIS-P8112, ASTM-D2210, TAPPI T403, ISO2759-2001, GB/T 1539, QB/T 1057   Technical Specifications:   Item Description Capacity 5~45kgf/cm^2(0.1kgf/cm^2) (250kPa ~ 5600kPa) Clamping force 600~1200 KP§Ñ Unit kPa, Lbs/in², kgf/cm² Resolution 0.1kPa Sensing Method Pressure Transmitter Operation Method Touch Screen Control Ring Material Stainless Steel SUS304 Inner diameter of clamp ring upper clamp ring: ¦µ31.5¡À0.1mm lower clamp ring: ¦µ31.5¡À0.1mm Maximum Stroke 18mm (without clamp) Maximum Loading Force 5600kPa Pressurization Speed 170¡À15ml/min Dimension (L¡ÁW¡ÁH) 560mmx500mmx600mm(approx.) Weight Approx. 60kg Power Single-phase, 220V, 60 Hz Hydraulic oil 100% silicone oil Required Air Source  ³0.6Mpa (provide by customer self) Accessories one piece higher pressure rubber film, one piece wrench, 10 pieces higher pressure correction sheet, one bottle silicon oil, one piece English user manual     read more
JNG Industry Sdn Bhd added new photo in Paper Testing - Concora Medium Fluter
Mar 19, 2024 at 12:04 pm —
JG-319A Concora Medium Fluter

JG-319A Concora Medium Fluter

Introduction: It is used to make samples for CCT/CMT for testing flat crush strength and vertical crush strength of corrugating medium.   Standard: GB/T 1061-2016£»ISO 7263-1-2018   Features: The appearance of the machine adopts the paint spraying process, with high anti-rust ability and beautiful appearance. Finishing S136 grooved wheel, good thermal conductivity, high precision and wear resistance. The instrument has fast response speed and small rotation error. The fluted wheel and the top cover are equipped with anti-scalding and heat-insulating devices to prevent the operator from accidentally touching the scald.   Technical Parameters: Item Description Speed 4.5r/min Temperature Resolution 1¡ãC Temperature Range Room temperature-200¡ãC Upper tooth Radius (1.5¡À0.1)mm Lower Tooth Radius (2.0¡À0.1)mm Tooth Depth (4.75¡À0.05)mm Outer Diameter of Fluted Wheel (228.5¡À0.5)mm Thickness of the Fluted Wheel 16¡À0.05mm Specimen Size 152mm¡Á12.7mm£¨L*W£© Work Pressure (49-108)N read more
JNG Industry Sdn Bhd added new photo in Paper Testing - Plybond Tester
Mar 19, 2024 at 11:43 am —
JG-308 Plybond Test Machine

JG-308 Plybond Test Machine

Introduction: This machine is mainly use for testing the internal bond strength of paper layers (that means paper surface boning strength between the fibers) and test the internal ply adhesion strength of corrugated board, which is designed according to TAPPI T569pm-00 (Scott type). Test principle: the paperboard sample absorbs the energy after impacted by a certain angle and weight, it display the ply adhesion strength. It could test five samples at one time and test unit is optional.   Standard Features:   Item   Description Capacity A: (20-500)J/m2 B: (500~1000)J/m2 Accuracy A: ¡À1J/ m2 B: ¡À2J/ m2 Test unit J/m2, lbf/in2 Resolution 0.001lbf/in² Specimen number 5pcs Clamp force 0-400N, adjustable Specimen size 25.4Lx25.4Wmm Impact angle 90¡ã Dimension 500X 400X 650mm Weight 65kg                           Standard Features of Cutter: Sample Size 130x25.4mm Width 25.4¡À0.1mm Thickness 0.1~11.0mm   read more
JNG Industry Sdn Bhd added new photo in Hardness Tester - Brinell Hardness Tester
Mar 18, 2024 at 04:40 pm —
JG-178H Hydraulic Brinell Hardness Tester

JG-178H Hydraulic Brinell Hardness Tester

INTRODUCTION Using hydraulic principle, manual operation produces 3000kg test force. The core component is a small hydraulic system. There is a control valve in the hydraulic system to control the test force. Whenever the test force reaches 3000kg, the control valve opens and the pressure drops. According to the provisions of the American standard ASTM E110, the force should be applied 3-4 times repeatedly, so that the pointer of the pressure gauge can reach 3000kg 3-4 times, which is equivalent to the provisions of the Brinell hardness test method for 3000kg test force, 10mm ball and 10-15 seconds.     Features Site test can be used in the workshop, simple operation, easy to carry, can test the hardness of large parts on site, and can be used for piece-by-piece inspection. Permanent indentation with 3000kg test force, 10mm ball, permanent indentation can be used for re-inspection. High reliability is completely tested according to the principle of Brinell hardness test, which is the same as the principle of desktop Brinell hardness tester, which can truly reflect the mechanical properties of materials or parts. High precision test force accuracy in line with GB, ISO, ASTM and other relevant standards, the same hardness test accuracy and desktop. As long as the instrument can clamped, parts of any shape and size can be tested. Wide range can choose a variety of test force, a variety of ball indenter, wide range, can test a variety of common metal materials.   Technical Specifications: Item Details Camera field View 3.3 x 2.2mm  Measurement Range 8 – 650HBW Indentation Resolution 0.01mm Hardness Resolution 1HBW Measurement Accuracy ¡À1% (HBW 10/3000) Compatible Indenter 5mm and 10mm steel ball indenter Indentation Length 1.2 – 6.0mm   read more
JG-1000TS Electromechanical Universal Testing Machine 10kN (1Ton)

JG-1000TS Electromechanical Universal Testing Machine 10kN (1Ton)

INTRODUCTION: JG-1000TS (Touch Screen) electromechanical testing machines offer force, displacement or deformation closed loop testing in tension, compression, flexure, shear, tear and peel etc. The machine can be equipped with a variety of accessories including: grips, fixtures, compression frames, thermal cabinets and extensometers covering all relevant applications as testing of rubber, plastics, foils, films, textiles, adhesives, paper, foods, foams, timber, wires or other metallic or non-metallic specimens and medical, electronic and other components. Conform To The Standards: I)Rigid and Reinforced Plastics/Composite: EN ISO 6259 - parts 1/2/3 Determination of tensile properties of thermoplastic pipes; EN ISO 527-1 - parts 1/2/3 Determination of tensile properties on plastics; ASTM D638 Standard Test Method for Tensile Properties of Plastics ISO 604 Plastics - determination of compressive properties ASTM D695- Plastics -- Standard Test Method for Compressive Properties of Rigid Plastics EN ISO 9969 Determination of ring stiffness on thermoplastic pipes; ISO 14125 Flexural Properties of Fiber-Reinforced Plastic Composites ASTM D3846 Standard Test Method for In-Plane Shear Strength of ReinforcedPlastics; EN ISO 13968 Plastics piping and ducting systems -Thermoplastics pipes-Determination of ring flexibility; EN ISO 844 Determination of compression properties; II)Geo-textiles: BS EN ISO 10319 Geotextiles —Wide-width tensile test; ASTM D3950 Standard Specification for Strapping, Nonmetallic (and JoiningMethods); JBT 8521(EN 1492-2): Textile slings. Safety. Round slings, made of man-made fibers, for general purpose use; ASTM D 6775-02 Standard Test Method for Breaking Strength and Elongation of Textile Webbing, Tape and Braided Material; III)Metal: ASTM E8 Standard Test Methods for Tension Testing of Metallic Materials; ISO 6892 Metallic materials — Tensile testing — Method of test at ambient temperature; BS EN 10002-1Determination of tensile properties on metals; BS EN 10002-5: Metallic materials —Part 5: Method of test at elevated temperatures; ASTM E21: Standard Test Methods for Elevated Temperature Tension Tests of Metallic Materials; IS0 783: Metallic materials -Tensile testing at elevated temperature; EN ISO 7438 Determination of flexure tests on metals; ASTM F606: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets; ISO 14589: Blind rivets - Mechanical testing; SAE J429: Mechanical and Material Requirements for Externally Threaded Fastener;      Technical Specifications: MODEL JG-1000TS Load Capacity 10KN (1000Kgf) Calibration Standard Class 0.5 according to ISO 7500-1 – Meets ASTM E-4 Testing Load Accuracy ¡À0.5% Testing Load Range 0.4%-100%FS Load Resolution 1/500,000FS Deformation Measuring Range 0.2%-100%FS Deformation Accuracy £¡À0.5% Deformation Resolution 1/¡À500000FS of the max deformation Position Accuracy Within ¡À0.5% of the value Displacement Resolution 0.04mm Crosshead Speed Range 0.00-1000mm/min Crosshead Speed Accuracy ¡À0.5% of the set speed Crosshead Travel 1100mm Max. Tensile Testing Space 770mm Max. Compression Testing Space 770mm Test Width 450mm Compression Platen Æ100mm Position Limit Switch Upper and lower lights Power Supply 0.75KW, AC220V¡À10%, 50Hz/60Hz Overall Dimensions (L*W*H) 850x585x1824mm Weight 420kg read more
next page

Switch to Mobile Version
1
Hello! Thanks for visiting my site. Please press Start button to Contact with Admin :)

Start